OEM Automatic Parking Barrier Gate System 1.5s 3s 6s Free
Maintenance
Parking Barrier Gate Features
Easy installation and maintenance reduce your labor costs.
A simple structure and no-limit switch design ensure easy
installation and maintenance which reduces your labor cost.
Heavy-duty and simple-design housing
The housing adopts a 2mm precise machining cold-rolled plate and
static electricity sprayed anti-UV surface which is non-scale and
unfading in 5 years, conformed to the IP54 dustproof and
waterproof, The Simple design also decorates your premises.
Anti-collision protects Parking Barrier Gate boom arm (optional)
Anti-collision mechanism will protect the boom arm not to being
damaged once the boom arm collides with a vehicle.
Safety--- Anti-hit by Loop Detector (Optional)
While the barrier boom moving down, If a coming vehicle is detected
to exist on the ground induction coil, the arm will go back to a
vertical position immediately until the loop input is dismissed and
then the arm will go down immediately.
Safety--- Anti-hit by IR photocell (Optional)
While the arm moving down, If infrared transportation between the
transmitter and receiver is blocked by a human or vehicle, the arm
will go back to a vertical position immediately. The arm will
automatically close once the infrared transportation recovers.
Automatically close after the given time
Once this function is set to “ON”, the barrier will automatically
close after a given time (1-90 seconds adjustable) if there is no
vehicle passed after the Parking Barrier Gate opens.
Automatically Close by loop detector (Optional)
If a loop detector is installed, after the vehicle passes the
barrier will automatically close once the loop input is triggered.
Automatically open by loop detector (Optional)
If a loop detector is installed, when the barrier boom is in a
horizontal position, the barrier boom will go up immediately once
the loop input is triggered
Manually control in case of no power.
Once the power is off, just open the cabinet and manually control
the barrier with a gear mechanism. Also, the Parking Barrier Gate boom can be manually locked in any position between horizontal and
vertical, the lock status will remain until unlocked manually.
Parking Barrier Gate Specification:
| Parking Barrier Gate Model | DZ-132 |
| Parking Barrier Gate Working Temperature | -35℃～+60℃ |
| Parking Barrier Gate Voltage | 220V±10%, 110V±10%, 50/60HZ |
| Parking Barrier Gate Rated power | 80W |
| Parking Barrier Gate Relative humidity | ≤90% |
| Parking Barrier Gate Remote control distance | ≥30m |
| Parking Barrier Gate Capacitor | 9+9uF/450W |
| Parking Barrier Gate Speed | 1.8S,3S,6S |
| Parking Barrier Gate Max boom length | 5meters |
| Parking Barrier Gate Remote Control | 100m in the open place |
Parking Barrier Gate Arm position adjustment.
2)First please set the arm horizontally and vertically through the
regulating nut to lengthen or shorten the connecting rod, and then
tighten the M12 safety nuts.
2)To make the arm well-balanced, please adjust the M8*140MM spring
regulating screw accordingly.
3)For the Parking Barrier Gate with double springs, please adjust the springs simultaneously.
Motor Speed and Parking Barrier Gate Boom Type:
| Boom type | Boom Length(M) | Opening time(S) | Height between boom and ground(M) |
| Straight boom | 6M≥L＞4.5M | 6S | H=0.8M |
| 4.5m≥L＞3M | 3S |
| 3m≥L | 1.5S |
Folding boom 90 degree | 5m≥L＞3M | 6S |
| 3m≥L | 3S |
Folding boom 180 degree
| 5m≥L＞3M | 6S |
| 3m≥L | 3S |
Fence Boom Two-level | 5m≥L | 6S | H=0.9M |
Fence boom Three-Level | m≥L | 3S | H=1.5M |
Maintenance
1)Keep the barrier gate clean.
2)Check the joints every month in case of any loose parts.
3)Check the spring elasticity after the barrier gate runs
30,000times
4)Check the easily worn-out parts(like spring, limit switch)every
half year and renew them.
5)Remote control distance will be shortened or not work in cases
like big object screening, battery run out. extreme weather.
Selection of Parking Barrier Gate spring.
| Spring type | Diameter | Spring Length |
| Small size | 4.5MM | 280MM |
| Medium size | 5.5MM | 280MM |
| Big size | 6.5MM | 280MM |
Our Service :1. Our Factory has 8 years of OEM/ODM experience in the line of
Parking Barrier Gate.
2. Prompt delivery time. Usually, we keep stock of standard models
which ensure prompt delivery.
3. We accept OEM/ODM orders to meet the requirements of clients.
4. A trial order is acceptable. Clients can buy samples and test
them before bulk ordering.
5. Online technical support makes it carefree to be our business
partner.
6. A variety of transportation for your choice. Sea shipment, air
cargo, or express, depends on your demand.
7. Factory can be visited on working days. Clients are warmly
welcome to visit our factory.
FAQ:1. When the Parking Barrier Gate
finishes closing, why does the arm open itself slowly?- the spring is too tight, you need to release the spring a little,
then test it again.
- see whether the main crank touches the triangle tightly or not, if
tightly, adjust it.
- reset the balance position and the electrical limit switch.
2. Why does the controller panel operate with "Di Di Di" abnormal
noises?
- As for this, it means the resistance on the controller board is
broken, if you have professional tools to check,
- then replace that broken resistance, if not, replace that
controller panel.
3. Why does the Parking Barrier Gate finish half operation of opening and closing?
- If use our controller panel, you only need to find resistance R37
on the controller panel and replace it is ok.
4. When the Parking Barrier Gate closed, why is there a 5-degree angle of inclination?
- the model is not good, and the gear doesn't fit each other tightly.
- the barrier didn't adjust well, needs to reset.
5. When the Parking Barrier Gate finishes opening, but it closes itself without any order control,
what's the problem?
- To check the loop cable first, because the loop cable may have
broken
- To check the motor sensor, if it is not set well, then reset it in
the middle between two holes on the sensor rod.
6. Why does the arm wave a lot when opening and closing?
- The spring is very tight
- The Screw touches the rubber absorption tightly, needs to be reset
again.
7. Rubber lining installation suggestion:
- It is good use for fast speed, like 0.6s, 1s, 1.8s and 3s.
- The place with many vehicles come and go, like shopping center,
carpark area.
8. Can you accept OEM/ODM orders?
- Absolutely, we are a manufacturer of barrier gates, with 7 years of
research and developing experience.
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831
