0.6S Fast Speed 10 Million Times MTBF Full Intelligent Barrier Gate
Quick Information
1.Fast speed, can be changed from 0.9sec to 6sec.
2.Double safety limit
3.Three operation modes: Remote control,push button,manually
operation.
4.Die-casting aluminum alloy motor,Waterproof,anti-aging
,Anti-sunshine .
5.runs stable and reliable.
Data sheet
| Max boom length | 6 meters |
| Opening time | 0.6sec to 6sec |
Power | Max 100w |
Housing Material | Powder-coated steel/ Aluminum |
Net weight (no boom) | 43KG |
MTBF | 10 million times |
Working temperature | -40°C~+50°C |
Protection grade | IP65 |
Driving unit | Servo motor |
Function Description:
1.When Power off, gate automatically open, no clutch design, no
need human intervention. When power on, gate automatically reset,
restore to the gate closing state, truly unattended, fire safety
standards. If special requirement, manual operation is required
when
power off . Operating arm open and close by hand also can be
realized by setting up control board DIP switch, which ensure that
the system can be used at any time.
2. The use of Single Balance Spring device, good regulation, no
noise, indefatigable, not easy to break, safe and reliable.
3. A variety of input and output modes can be selected, normally
open normally closed optional.
4. Arm opening angle can be adjusted from 60 to 90 degrees, 10
degrees resolution, suitable for eaves prominent place to install.
5. Closing speed can be adjusted, from 0.9sec to 6sec
6. Barrier gate up&down signal relay switch output.
7. Barrier gate running state: OK signal output indicating that the
gate is working properly.
8. Barrier gate operation abnormal alarm signal output.
9. Traffic light relay switch signal output.
10. External loop detector signal anti-smashing interface, infrared
sensor signals anti-smashing interface.
11. Count mode interface.
12. Arm Open priority anti-smashing function, regardless of the
current gate in what state, the operator through the triple push
button,
software or remote control to issue a gate arm up, the gate will
give priority to the implementation of the opening action.
13. Barrier with anti-collision protection function, when the
vehicle hits the gate arm, arm can be swing out to avoid damage to
the vehicle
and barrier gate machine.
14. Delay down selection function.
15. high sensitivity arm auto reverse function (intensity can be
adjusted)
16. Parking system interface
17.RS485 or RS232 network communication control up&down
interface (no need to install communication module)
18. Anti-collision alarm signal interface.
19. Arm direction can be changed easily
20. Adjustable speed port (S curve adjustment)
21. High-strength precision cast steel, industry moving parts
beyond the industry quality
RFQ:
Q: What's the order process?
A: Follow the steps on below to complete your order.
- 1. Inquiry
Provide us detailed information about your requirement, and we'll
recommend the suitable products according to your request
-2. Quotation
Official quotation form with all clear specifications according to
the order
-3. Invoice
Invoice will be issued once the quotation is confirmed.
-4. Payment
Payment shall be issued once the invoice issued. Full payment is
acquired.
-5. Production
Bulk production shall be taking 15-25 working days.
-6. Delivery
by sea, air or courier. Detailed picture of package will be
provided upon the service you've chosen. Packaging info will be
sent upon confirmation.
Contact us for pricelist and catalog:
Sarah lee
Email:sarah@wonsunbarrier.com
Skype:lee72323
Whatsapp:+86 13751381783
