Up/Down Speed Parameter Adjustments Instruction:
Parameter Name Explanation:
D00spa name
PA__00 parameter item
PA__AST: reset
** _ Err: false alarm
Key Description:
Menu: menu key, switch in four parameters
L / R Arrow: Left and right movement keys, moves circularly, the
corresponding characters flash
UP arrow: increase from 0 to 9, cycle key, add one for each
pressing
ENTER: Enter key. Press ENTER at the currently displayed parameter
to enter the specific parameter setting.
Parameter Explanation:
1d0000, 2d0000, 3d0000, 4d0000: Indicates that the current
parameter is 0000, which can correspondingly
revise from the first to the fourth bit on the rightmost side.
Halfway return time parameters: PA__09 (range from 100 ~ 1500)
Up parameters: PA__10, PA__11 (range from 100 ~ 9999), PA__12
(range from 01 ~ 99),
Down parameters: PA__13, PA__14 (range from 100 ~ 9999), PA__15
(range from 01 ~ 99),
Down position parameters: PA__20 (range from 01 ~ 9999)
Up position parameter: PA__21 (range from 01 to 9999)
Resistance sensitivity: PA__23 (range from 10 to 99)
Boom level: PA__30 (range from 0 to 1)
| Parameter | PA_09 | PA_10 | PA_11 | PA_12 | PA_13 | PA_14 | PA_15 |
| Medium octagon boom 3m,1sec (without adhesive tape) | 1500 | 1650 | 1850 | 35 | 1550 | 1850 | 05 |
| Medium octagon boom 3m,1sec (with adhesive tape) | 1500 | 1650 | 1850 | 35 | 1400 | 1900 | 30 |
| Large octagon boom 4.5m,2.5sec (without adhesive tape) | 400 | 950 | 2800 | 35 | 750 | 3500 | 30 |
| Large octagon boom 6m,4sec (with adhesive tape) | 400 | 500 | 5500 | 25 | 400 | 5500 | 25 |
| 3m round boom,0.9sec | 1500 | 1650 | 1750 | 25 | 1650 | 1750 | 15 |
| 2.5m round boom,0.6sec | 1200 | 1350 | 1050 | 20 | 1250 | 1500 | 30 |
1. NO/NC mode selection, in the dip switch 1, ON for NC, OFF for
NO.
2. Self-locking when power off or gate automatically open
selection. In dip switch 2, ON is for automatic opening
when power off;
3. Automatic reverse or stop selection when meets external
obstacle. In dip switch 3, ON is for automatic
stop and OFF is for automatic reversing;
4. Auto closing speed adjustment selection, in the dip 4, 0.9s and
1.3s for option. ON is for 0.3s.
5. Delay automatic closed selection. Dip switch5,6,7,8 are for it
and the delaying time is 1s,2s,3s,4s,5s,
8s,10s,15s,20s,25s,30s,35s,40s,50s,60s for option.
6. The boom angle adjustment, suitable for some areas that the boom
can’t reach the vertical position
caused by obstacle. Adjustable for 60°, 70°, 80° and 90°. And the
dip switch is another independent one (1 2 switch).
7. Maintenance mode switch, convenient for possible repairing and
adjusting.
8. RS485 interface, can connect with computer, check the barrier
gate state and alarm information.
9. Parking lot open/close control signal and remote control
open/close signal are separate. Arm opening
have memory function, Number of pulse arm opening, and closed after
number of cars (must be equipped with a vehicle detector)
10. Emergent stop input signal function.
11. Arm swing out signal input function.
12. Alarm information output function.
13. Barrier gate OK signal output function.
14. All input ports are optoelectronic isolation, the input voltage
range is DC5 ~ 24V
15. Vehicle detector signal input and infrared signal input, that
is, use the output COM, NC of the loop detector
(normally the No.4 and No.11, specially related with detector, the
barrier gate not respond to closing command
when the coil is not connected).The infrared detector uses the NPN
type.
