Wind Power Full Automatic Barrier Gate Operator For Toll Gate
System
Introduction:
The DZ-138 servo barrier gate series, which researched developed
and manufactured by our company, adopts international advanced
technology, mechanical and electrical integrated design. Planetary
gear drive, high torque, un-blocked, oil tight, no noise,
automatically unlocked when the power is off, with 10 million
operation times. The motor uses the DC 24V permanent magnet
synchronous motor (PMSM motor), adjust to the global voltage,
high-speed operation and rapid response, it will not overheat after
24 hours, frequent operation, speed time can be adjusted based on
the vehicle flow and arm length, safe and reliable. The series
servo barrier gate is free-debugging and free-maintenance, achieve
the fully automated and intelligent, and the barrier arm open/close
is fast and smooth, easy to use and safe.
Data sheet
| Max boom length | 6 meters |
| Opening time | 0.6sec to 6sec |
Power | Max 100w |
Housing Material | Powder-coated steel/ Aluminum |
Net weight (no boom) | 43KG |
MTBF | 10 million times |
Working temperature | -40°C~+50°C |
Protection grade | IP65 |
Driving unit | Servo motor |
Program 1
The barrier gate can be controlled by two-key push button and an
impulse will trigger the operation relay.
Connecting GND and COM, 24V with UP is for machine opening, 24V
with Down is for machine closing. Other accessories interface input
available, like IR sensor and loop detector signal.
Program 2
The barrier gate can be controlled by remote controller or GSM gate
opener.
Connecting the antenna receiver GND to COM on the board, Remote-up
is for opening and Remote-down is for closing.
If the remote control receiver is non-electric relay signal,
connecting GND and COM first, the 24V connecting with Remote-up is
for opening and 24V connecting with Remote-down is for closing.
Program 3
The barrier gate can be controlled by gate photocell(IR sensor) or
loop detector for automatic opening and closing. There are other
signal input as emergency stop and alarm signal. The connection is
as program 1 mentioned.
Program 4
Boom-drop signal input: when the boom is crashed by passing
vehicle, the barrier gate will stop to run with a warning output.
Advanced Features
* Low-power servo motor, truly maintenance-free, high durability
and energy saving.
* No position sensor, each stop with the same accuracy. Pair using
is fully synchronized.
* No clutch device, boom will auto rise when power off (or unlock
when power off, only use hand to lift the boom gently).
* No brake design, no longer to worry about the troubles from the
wear of the brake pads and a series of reliability problems.
* Excellent waterproof, dust-proof performance, the whole product
protection grade is IP65.
* Can work with DC24V battery, can be combined with solar energy,
wind power, suitable places lack of AC power.
* Boom rise automatically when power off, comply with the fire
safety requirements.
* Long time maintenance-free, greatly reducing maintenance costs.
* During the course of the movement without any mechanical impact
or shock absorption, the highest reliability, the longest service
life.
* Direction exchange is easy.
* Free debugging during production and installation, greatly reduce
the maintenance and labor costs.
Packing List:
| Title | Specification | Qty | Unit | Note |
| Barrier gate boom | | 1 | Piece | |
| Machine case press board | | 2 | piece | For fixing case |
| Expansion bolt | M16X150 | 4 | set | For fixing case |
| Supporting pole | | 1 | piece | Optional part |
| Expansion bolt | M8 | 4 | unit | For fixing boom |
| Boom fixed screws | M12*70 | 2 | unit | |
| Case Key | | 2 | unit | |
| Balance spring | | 1 | unit | For spare usage |
| Remote controller | | 2 | unit | |
| Machine control | | 1 | unit | |
| Instruction | | 1 | piece | |
RFQ
1.Q: How long will your barrier working?
A:barrier life span more than 10 years.
2.Q: What should we do if there have problems during using?
A: We have 2 years guarantee. Any barrier problems you have,
Welcome email or call me! We will provide our best professional
service for you.
3.Q: First time import, how can i believe that you would send
product?
A: We are verified company by Everychina, to make transaction
success .
4.Q:How to import your machines?
1. We will prepare barrier and shipment for you after payment;
2. We will give you bill of loading after barrier depart our
shipping port;
3. Our shipping agent will contact you when barrier arrival ;
4. You can pick up barrier by bill of loading .
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype:SueZhang729
Whatsapp:+86 158 7925 9831
