New Inverter Motor Parking Barrier Gate Car Parking System Factory
Price
Technical Data:
1 Working temperature(motor): -35℃~+85℃
2 Working temperature(control panel): -35℃~+85℃
3 Voltage:220V±10%,50HZ or 110V±10%,60HZ
4 Rated Power:80W,capacitor:9+uF/450W
5 Humidity:≤90%RH
6 Distance of remote control:100M＞L≥30M in the open place
Common Malfunctions and Solutions
1 The arm is no reaction when connect the power and press the
open/close key.
a: Check the controller’s power supply and fuse.
b. There is no battery or power shortage on the remote control, the
distance is too far.
c.There is co-frequency interference in the vicinity, check with
the wire control interface to see if it’s normal.
d.The external protection circuit has failed or in a protected
state,check the infrared device or loop detector device.
e: Check the motor and capacitor to see if invalid.
2 The boom could not raise up or fall down when press the
open/close key.
a:The photoelectric limit is on bad contact,check the connections.
b:Replace the photoelectric limit switch.
3 The motor is buzz,boom is no reaction when press the open/close
key.
a: The voltage is insufficient,check the 220V power supply.
b: The gears are stuck, and hand wheel rotates several circles
toward the loose place, and re-adjust the
photoelectric limit to prevent the struck caused by mechanical
limit from being before the photoelectric limit.
c: It’s imbalance between the balance spring and boom,re-adjust it.
4 The boom is not horizontal and vertical.
a:The photoelectric limit is shaft,re-adjust and fix.
b: Check the connection rod and adjust the boom to horizontal and
vertical,and make the photoelectric limit acts
before the mechanical limit.
5 The force for arm up become smaller,sometimes need the handle
assistance to make it up.
a: Check the motor and capacitor.
b: Re-adjust the spring balance.
Interchange Instruction for Arm directions
The product direction can be interchanged, divided into 6 steps.
Step 1: remove the M8X20 inner hexagonal screw,take out the machine
core;
Step 2: remove the electrical supporting plate from left side to
the right side;
Step 3: remove the M10*30 fixed screw on the boom tray (see figure
1);
Step 4: using the M14*150 screw to pull out the boom tray head(see
figure 2);
Step 5: install the boom tray head from the original left to the
right side,or the original right to the lest side;
Step 6: put the machine core back into machine case, fixed the
M8*20 hexagonal screw, direction interchange is completed, no need
to adjust other Settings.
Product Maintenance
1 Keep the barrier gate clean
2 Check the joints ever month in case of any loose parts.
3 Check the spring elasticity after the barrier gate running 3000
times.
4 Check the easily worn-out parts(like the spring,limit
switch),every half year and renew it.
5 Remote control distance will be shortened or not work in case
like big object screening,battery exhausting,extreme weathers.
Service:
Service for free:
1. One year free service is supplied(not including the arm and
remote)
2. Lifetime charged service is supplied
3. Technical service is supplied
4. OEM: we can customized machine case, color, logo for you, which
accroding to your detailed requirements.
5. Technical support and aftersales service, it is a long term
relatioship between us.
6. Price can be negotiable when you have big order quantity.
Service for charging:
1. Broken by wrong installation
2. Broken by improper voltage
3. The surfaces of the barrier destroyed by wrong installation and
usage
4. Overdue service items are out of our promise.
Product Maintenance
1 Keep the barrier gate clean
2 Check the joints ever month in case of any loose parts.
3 Check the spring elasticity after the barrier gate running 3000
times.
4 Check the easily worn-out parts(like the spring,limit
switch),every half year and renew it.
5 Remote control distance will be shortened or not work in case
like big object screening,battery exhausting,extreme weathers.
FAQ:
Q: Are you trading company or manufacturer ?
A: We are a professional barrier gate manufacturer.
Q: How long is your delivery time?
A: Generally it is 2-5 days if the goods are in stock. or it is 5-7
days if the goods are not in stock, it is according to quantity.
We can send it for you by DHL/Fedex/TNT/SEA/AIR or your
requirments.
Q: How about payment terms our company provide?
A: T/T or Western Union.
Q: Do you provide samples ?
A:No,we don't provide samples. The MOQ of our products is 1pc.
