The newest Automatic Barrier Gate Toll Barrier 0.9seconds 4 Meters
Automatic Barrier Gate Functions
1. The Automatic Barrier Gate arm can easily switch in different
directions.
2. The Automatic Barrier Gate opens via a motor wheel during power
loss and locks automatically when powered.
3. The Automatic Barrier Gate boom operates smoothly with a
motor-driven system of cranks and shafts.
4. The Automatic Barrier Gate barrier gate can be controlled
remotely.
5. The Automatic Barrier Gate boom automatically reverses upon
encountering an obstruction.
6. An infrared photocell connector is included.
7. A loop detector connector is also provided.
8. It integrates seamlessly with parking system equipment,
utilizing wired control (requires a switch signal).
9. A connector for traffic lights (AC220V, under 40W) is available.
10. It provides a dry contact signal for the parking system (COM,
NC, NO).
11. The closing mechanism features an adjustable auto-delay.
Automatic Barrier GateTechnical Data:
| Automatic Barrier Gate Model No. | DZ-132 |
| Automatic Barrier Gate Framework Material | Cold-roll sheet |
| Automatic Barrier Gate Beam | Aluminum alloy |
| Automatic Barrier Gate Dimension | 352 * 302 * 1120mm |
| Automatic Barrier Gate Net Weight | 45KG |
| Automatic Barrier Gate Input Interface | Photocell, loop detector, parking system, wire control |
| Automatic Barrier Gate Input | 12V relay signal or Pulse Wide>100MS |
| Automatic Barrier Gate Power Supply | AC220V/110V, 50/60Hz |
| Automatic Barrier Gate Motor Consumption | 80W |
| Automatic Barrier Gate Working Temperature | -35°C to +85°C |
| Automatic Barrier Gate Relative Humidity | ≥90% |
| Automatic Barrier Gate MTBF | 3 million time |
| Automatic Barrier Gate Push Button | Support |
| Automatic Barrier Gate Remote Control | Two-button remote transmitter, Distance≤100m |
| Automatic Barrier Gate Optional Accessories | Loop detector; IR photocell |
| Automatic Barrier Gate Beam Length | 1M - 6M |
| Automatic Barrier Gate Opening/Close Time | 0.9sec-6sec |
Automatic Barrier Gate Analysis of the fault
| Item | Automatic Barrier Gate Fault | Fault reason | Fault removal |
| 1 | The power indicator is not on. | 1. The power supply is not connected; 2. Fuse blown.
| 1. Connect the power supply; 2. Replace the fuse.
|
| 2 | The power indicator is on, but the remote control does not react. | 1. Remote control is wrong; 2. Bad receiver module; 3. Interference from the same frequency.
|
1. Relearn the remote control; 2. Replace remote control receiver; 3. Replace other frequencies.
|
| 3 | The power button is on, and the barrier indicator light is normal,
but the motor is not running. | 1. Open or wrong motor line; 2. Motor blocked
| 1. Connect the motor line; 2. Manually release the motor.
|
| 4 | Unable to up and down limit. | 1. Wrong encoder connections; 2. damaged encoder |
1. Check if the encoder is installed correctly; 2. Replace the encoder.
|
| 5 | Remote control does not react. | 1. Insufficient battery power of the control; 2. Bad control. | 1. Replace the battery; 2. Replace the control. |
| 6 |
"E-0 1" appears on the display.
| Overtime protection is running on the motor | 1. Check if the encoder is installed correctly. 2. Replace the encoder |
FAQ
1. Are you a manufacturer or trade company?
We're a professional manufacturer with a factory in Shenzhen
Pingshan since 2007.
2. What is your MOQ?
As for usual orders, there is no MOQ; For OEM orders, at least 30
sets.
3. What is your delivery time?
For a usual order, it takes 3-5 days after we receive your payment
with 50 sets of order quantities.
For OEM orders, it is 7-15 days after receiving your payment with
30 sets of order quantities.
4. What are the terms of payment?
30%-40% advance deposit, 60%-70% balance before shipment for large
quantities.
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831
RS485 Inverter Motor Automatic Barrier Gate With Bi-direction Main
Shaftg Vehicle Barrier Gate
