Eletrical Swing Out Gate Automatic Barrier Gate With Remot Control
WONSUN SUMMER PROMOTION: BUY 20 SETS, GET 1 FOR FREE
If interest, please contact me freely!
Skype: zimin1314
Whatsapp: +86 18507481610
Quick details:
| model | WSTP-125 |
| Working temperature | -40℃~+75℃ |
| Voltage | 220V±10%, 110V±10%, 50/60HZ |
| Rated power | 80W |
| Relative humidity | ≤90% |
| Remote control distance | ≥30m |
| Net weight | 50kgs |
| Speed | 1S,1.8S,3S, 6S |
| Max boom length | 6 meters |
| Motor Rotational speed | 1400rmp |
| Protection Degree | IP54
|
Automatic barrier gate functions & features:
| 1) Manual release |
| 2) Machine core with compression spring, effectively avoids the
accidents caused by spring breaking |
| 3) Die-casting aluminum alloy motor, precision and good at thermal
radiating |
| 4) Motor cooling fan, solving the problem of heat-protection |
| 5) Double safety limit switches (photocell electrical limit
switch/motor memory sensor) |
| 6) Reversing on obstacle |
| 7) Auto-closing |
| 8) Support the INFRARER PHTOCELL for anti-bumping function
(optional) |
| 9) Support the external and internal VEHICLE LOOP DETECTOR
(optional) |
| 10) Traffic light interface |
| 11) Wire control (switch signal)/ Remote control (418MHZ) |
| 12) RS485 communication module (optional) |
Parking list:
Each barrier gate will include:
1 pcs Gate Barrier
1 pcs arm boom (from 1m to 6m can customised)
1 pcs control panel(built inside)
2 pcs remote controllers
1 pcs manual book
Best Service:
Service for free:
1. One year free service is supplied(not including the arm)
2. Lifetime charged service is supplied
3. Technical service is supplied
4. OEM: we can customized machine case, color, logo for you, which
accroding to your detailed requirements.
5. Technical support and aftersales service, it is a long term
relatioship between us.
6. Price can be negotiable when you have big order quantity.
Service for charging:
1. Broken by wrong installation
2. Broken by improper voltage
3. The surfaces of the barrier destroyed by wrong installation and
usage
4. Overdue service items are out of our promise.
FAQ:
1. When barrier finish closing, why does the arm open itself
slowly?
- the spring is too tight, you need release the spring a little, then
test it again.
- see whether the main crank touch the triangle tightly or not, if
tightly, adjust it.
- reset the balance position and the electrical limit switch.
2. Why does the controller panel operate with "Di Di Di" abnormal
noises?
- As for this, it means the resistance on controller board is broken,
if you have professional tools to check,
- then replace that broken resistance, if not, replace that
controller panel.
3. Why does the barrier finish half operation of opening and
closing?
- If uses our controller panel, you only need to find resistance R37
on controller panel, and repalce it is ok.
4. When barrier closed, why is there a 5 degree angle of
inclination?
- the model is not good, and the gear doesn't fit each other tightly.
- the barrier didn't adjust well, need to reset.
5. When barrier finish open, but it closes itself without any order
control, what's the problem?
- To check the loop cable first, because the loop cable maybe brokem
- To check the motor sensor, if it is not set well, then reset it in
the middle between two holes on sensor rod.
6. Why does the arm wave a lot when opening and closing?
- The spring is very tight
- The Screw touches the rubber absorption tightly, need to reset
again.
Arm direction:
