Electric Parking Lot Arm Barrier Gate System / Car Park Boom Gates
Barrier gate, also named as intelligent/electric vehicle road
blocker, is a widely used machine in gate access control
application.
Boom barrier gate is very important for an automatic car parking
management system and other traffic project; this equipment widely
uses for block the road, manage the access of the gate for all
vehicles such as car, truck, bus even motorbike. Everyday, you can
easy find barrier gate at everywhere, airport, highway, commercial
building, shopping mall, factory, hospital, and so on.
In addition, all parking system integration and/or installation
company can more easily understand the important value of barrier
gate for parking lots project. So how to choose a good quality and
high cost-effective barrier gate is an important lesson for their
manager and engineers.
Why choose us?
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd cares
about the success of its customers. Wonsun believes in helping
coustomers define the best soultion for their particulate
application. With our barrier gate expertise, Wonsun can help
customer desigh customers in taking the complexity out of barrier
gate, pedestrian barrier series and parking system.Because our
focus is on Quality with a capital Q.We just won’t settle for less.
Specification
| Model number | WSTP-115 |
| Housing Material | 2.0 mm cold rolled steel sheet |
| Arm material | Aluminum alloy |
| Motor power | 120W |
Frequency | 60HZ/50HZ |
| Spring And Bearing | Heat Treatment: more durable, more than 5 million times through
operation testing |
| Remote Control Distance | ≥30M |
| Voltage | AC 220V/110V±10%, 50/60HZ |
| OEM/ODM | supported |
| Delivery | By Sea: big order(more than 100 sets), Cheap, suggested By Air: small order(1-15 sets), quick and cheap, suggested |
| Application | Parking Lots, Toll Gates, Goods Yards, Railway Crossings,
Commercial Premises, Aparment Block |
Packing details:
We use Strong carton case packing, inside with air bubble film for
protection.
Common malfunctions and solutions:
1. Motor works but there is no reacion on the arm;
a. Please check whether the clutch device is locked or not.
2.The boom could not rise up or fall down to the end;
a. When change a long boom to a short one, please readjust it ,
b. The sensor dose not plug well, please check it.
c. The "Speed adjust switch" is wrong adjust, please readjust it.
3.The distance of the charge capacity of the remote controller is
enough or not
4. There is no reaction when pressing the remote controller
buttons,
a. Please check whether the power is supplied to the barrier gate
or not,
b. Please check whether the fuse is burnt out or not
c.Please check whether the code both in the remote controller and
the controller board are accordant or not
Any question please not hesitate to contact me , I will answer you
within 5 minutes. Many thanks.
