IP44 Remote Control Parking Barrier Gate Auto Closing For Access
Control
Why choose us?
1. One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2. Broken by improper voltage.
3. The surfaces of the system were destroyed by the wrong
installation our use.
4. Broken by natural disaster.
5. Overdue
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if
there is any.
The explaining authority of this product instruction and service
article belongs to the production factory.
Parking Barrier Gate Advantages
1. Parking Barrier Gate Special driving structure, no gears,
non-belt driving, maintenance free, high stability, longer life.
2. The Parking Barrier Gate's Special balancing structure design
gives the Parking Barrier Gate arm the features of slow-starting,
fast-running, and slow-stopping.
3. It is running without arm-shaking.
4. The Parking Barrier Gate arm is 90 degrees running excluding the
failure caused by 360 degrees running.
5. Special low-speed aluminum housing motor integrated gearbox
design, low noise, fast heat dissipation.
6. The driving mechanism has the design of an intelligent
overheating protection system, in frequent use, it can control the
warming of the motor, making the motor not burn easily.
7. The main engine adopts a mechanical limit switch and
photoelectric limit switch dual protection, to avoid the problems
caused by using a traditional magnetic switch which is easily
interfered with by the external environment.
8. Parking Barrier Gate can be chosen from 1m to 6m.
Parking Barrier Gate Parking Barrier Gate Parking Barrier Gate
Parking Barrier Gate Parking Barrier Gate Parking Barrier Gate
Parking Barrier Gate Parking Barrier Gate Parking Barrier Gate
Parking Barrier Gate Parking Barrier Gate Parking Barrier Gate
Parking Barrier Gate
Parking Barrier Gate Model Selection and Differences
Parking Barrier Gate Specifications
Parking Barrier Gate Model | WST1211 |
Parking Barrier Gate Working Temperature | -40℃～+75℃ |
Parking Barrier Gate Voltage | 220V±10%, 110V±10%, 50/60HZ |
Parking Barrier Gate Rated power | 80W |
Parking Barrier Gate Relative humidity | ≤90% |
Parking Barrier Gate Remote control distance | ≥30m |
Parking Barrier Gate Net weight | 48kgs |
Parking Barrier Gate Speed | 1S,1.8S,3S, 6S |
Parking Barrier Gate Max boom length | 6 meters |
Parking Barrier Gate Motor Rotational speed | 1400rmp |
Parking Barrier Gate Protection Degree | IP44 |
1 pcs Parking Barrier Gate
1 pcs arm boom (from 1m to 6m can customized)
1 pcs control panel(built inside)
2 pcs remote controllers
1 pcs manual book
Communication with customers
1) Q: Connected power and pressed the open/close button but the
traffic barrier gate no action.
A | Reason | Solution |
1 | Fuse blown | Check the fuse and power in the controller |
2 | The battery of the remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click the OPEN/CLOSE button on the
control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q: Connected power and press the open/close button, the traffic
barrier gate will move but even when it is in the right position,
the motor still runs and does not stop.
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to the correct position |
2 | Main controller failure | Change a new one |
3) Q: The motor running but the traffic barrier gate arm is not in
action?
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock the clutch and manually rotate the arm to a horizontal or
vertical position then try again |
2 | The tension of the balancing spring is not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing, traffic barrier gate arm cannot reach
the right position (90° vertical & 180° horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open the barrier door and unlock the clutch to check when the arm
is at 90° vertical position if the master rod covers slave one; when the arm
is at 180° horizontal position if the master rod and slave one are in the
same straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal
|
| Market | Revenue(Previous Year) | Total Revenue (%) |
| North America | USD 63,608 | 1 |
| South America | USD 508,869 | 8 |
| Eastern Europe | USD 3,180,436 | 50 |
| Southeast Asia | USD 318,043 | 5 |
| Oceania | USD 127,217 | 2 |
| Mid East | USD 190,826 | 3 |
| Western Europe | USD 1,017,739 | 16 |
| Domestic Market | USD 954,130 | 15 |
For the things that most customers want to know:
1. One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper voltage.
3. The surfaces of the system were destroyed by the wrong
installation our use.
4. Broken by natural disaster.
5. Overdue
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if
there is any.
The explaining authority of this product instruction and service
article belongs to the production factory.
Contact information:
Sue Zhang
Skype: SueZhang729
Whatsapp:+86 158 7925 9831
Email:sue@wonsunbarrier.com
