High-Speed Automatic Boom Barrier Parking Barriers With Straight
Bars 1- 6 Meters
Automatic Boom Barrier Advantages
1. Automatic Boom Barrier Special driving structure, no gears, non-belt driving, maintenance
free, high stability, longer life.
2. Automatic Boom Barrier Special balancing structure design makes the barrier arm has the
features of slow-starting, fast-running, and slow-stopping.
3. It is running without arm-shaking.
4. The Automatic Boom Barrier arm is 90 degrees running excluding the failure caused by 360
degrees running.
5. Special low-speed aluminum housing motor integrated gearbox
design, low noise, fast heat dissipation.
6. The Automatic Boom Barrier driving mechanism has the design of an intelligent overheating
protection system, in frequent use, it can control the warming of
the motor, making the motor not burn easily.
7. The Automatic Boom Barrier main engine adopts a mechanical limit switch and photoelectric
limit switch dual protection, to avoid the problems caused by using
a traditional magnetic switch which is easily interfered with by
the external environment.
8. Automatic Boom Barriercan be chosen from 1m to 6m.
Automatic Boom Barrier Model Selection and Differences
Automatic Boom Barrier Specifications
Model | WST1211 |
Working Temperature | -40℃～+75℃ |
Voltage | 220V±10%, 110V±10%, 50/60HZ |
Rated power | 80W |
Relative humidity | ≤90% |
Remote control distance | ≥30m |
Net weight | 48kgs |
Speed | 1S,1.8S,3S, 6S |
Max boom length | 6 meters |
Motor Rotational speed | 1400rmp |
Protection Degree | IP44 |
Automatic Boom Barrier Communication with customers
1) Q: Connected power and pressed open/close button but the traffic
barrier gate did not action.
A | Reason | Solution |
1 | Fuse blown | Check the fuse and power in the controller |
2 | The battery of the remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click the OPEN/CLOSE button on the
control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q: Connected power and press the open/close button, the traffic
barrier gate will move but even when it is in the right position,
the motor still runs and does not stop.
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to the correct position |
2 | Main controller failure | Change a new one |
3) Q: The motor running but the traffic barrier gate arm is not in
action?
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock the clutch and manually rotate the arm to a horizontal or
vertical position then try again |
2 | The tension of the balancing spring is not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing, Automatic Boom Barrier arm cannot reach the right position (90° vertical & 180°
horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open the Automatic Boom Barrier door and unlock the clutch to check when the arm is at 90° vertical position if the master rod covers slave one; when the arm
is at 180° horizontal position if the master rod and slave one are in the
same straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal
|
| Automatic Boom Barrier Market | Revenue(Previous Year) | Total Revenue (%) |
| North America | USD 63,608 | 1 |
| South America | USD 508,869 | 8 |
| Eastern Europe | USD 3,180,436 | 50 |
| Southeast Asia | USD 318,043 | 5 |
| Oceania | USD 127,217 | 2 |
| Mid East | USD 190,826 | 3 |
| Western Europe | USD 1,017,739 | 16 |
| Domestic Market | USD 954,130 | 15 |
1 pcs Automatic Boom Barrier
1 pcs Automatic Boom Barrier arm boom (from 1m to 6m can customized)
1 pcs control panel(built inside)
2 pcs remote controllers
1 pcs manual book
For the things that most customers want to know:
1. One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper voltage.
3. The surfaces of the system were destroyed by the wrong
installation our use.
4. Broken by natural disaster.
5. Overdue
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if
there is any.
The explaining authority of this product instruction and service
article belongs to the production factory.
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831
