5 Million Operation Times Heavy Duty Toll Barrier Gate With
Aluminum Alloy Arm
Quick Detail:
Name: Toll barrier gate
Speed:1s,1.8s.3s 6 seconds
Feature:Straight boom
Rated Power:80W
Certificate:CE, ISO, SGS
Net Weight:48KG
Voltage:AC220V, AC110V
Functions & Features
1. Manual release
2. Machine core with compression spring, effectively avoids the
accidents caused by spring breaking
3. Die-casting aluminum alloy motor, precision and good at thermal
radiating
4. Motor cooling fan, solving the problem of heat-protection
5. Double safety limit switches (photoelectricity limit
switch/motor memory sensor)
6. Reversing on obstacle
7. Auto-closing
8. Support the INFRARER PHTOCELL for anti-bumping function
(optional)
9. Support the external and internal VEHICLE LOOP DETECTOR
(optional)
10. Traffic light interface
11. Wire control (switch signal)/ Remote control (418MHZ)
12. RS485 communication module (optional)
Specifications
Power 250W
Housing Size 344*290*1090 mm
Housing color orange
Rail type straight
Rail material Aluminum Aloy
Rail lifting time 1S 1.8S (fast) /3S 6S(ordinary)
Rail length 4.5m(fast) / 6m(ordinary)
MCBF ≥5,000,000 times
Motor speed 3 0r/min
Wave pressure optional
Bumping bounce back optional
Working Temperature -10°C to +45°C
Working environments indoor,outdoor
Relative humidity <90% coagulation free
Parking & Shipping:
| Packing list |
| Name | Specifications | Quantity | Remarks |
| Machine core | Good in working | 1 | Main part |
| Barrier arm | Straight, folding or fence arm | 1 | Optional |
| Boom press board | | 1 | Fixing the boom |
| Self-tapoing screw | ST4*16 | Fixing the boom |
| Self-tapoing screw | st3*10 | 4 | Fixing the boom |
| Supporting pole | | 1 | Fupporting the boom |
| Expanion bolt | M16*150 | 4 | Fixing the case |
| Hexagonal Inner Screw | M8*35 | 4 | fixing the case |
| Clutch key | | 1 | clutch device |
| Case Key | | 2 | for case and cover locking |
| Balance spring | According to length of barrier arm | 1 | for sapre usage |
| Remote emitter | less than 30m is available | 1 | For remote control |
| Remote conrol handles | less than 30m is available | 2 | For remote control |
| Instruction | in English | 1 | For reference |
| RS485 interface | | 1 | Optional |
| Disc | | 1 | Optional |
| Communication Mould | | 1 | Optional |
| Cover head | | 1 | 3 years without fading |
| Expanion nut | M8 | 4 | Fixing the supporting pole
|
Communication with customers
1) Q: Connected power and press open/close button but boom barrier
gate no action?
A | Reason | Solution |
1 | Fuse blown | Check fuse and power in controller |
2 | Battery of remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click OPEN/CLOSE button on control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q:Connected power and press open/close button, boom barrier gate
will move but even when it is at right position, the motor still
running and not stop?
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to correct position |
2 | Main controller failure | Change a new one |
3) Q: Motor running but boom barrier gate arm no action?
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock clutch and manually rotate arm to horizontal or vertical
position then try again |
2 | Tension of balancing spring not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing,boom barrier gate arm cannot reach right
position (90° vertical & 180° horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at
180° horizontal position if master rod and slave one are in the same
straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal position |
