110v Automatic Barrier Gate Led Light Arm Barrier Gate System
Automatic Barrier Gate Basic Features:
1) By security. The Automatic Barrier Gate will automatically go
back when meets obstacles during closing.
2)Automatic Barrier Gate AC motor is more powerful and no
maintenance.
3)Automatic Barrier Gate Boom/arm can be chosen from 3 meters to 6
meters, and Automatic Barrier Gate.
4)Closing time is also arranged from 1 second to 6 seconds.
5)The Automatic Barrier Gate can be both right-installed and
left-installed.
6)All the operation processes are soft without any noise and
shaking.
7)Infrared photocell interface, loop detector interface, and IC
system.
8)The interface is reserved for the other functions.
9)Green light and red light are used inside for indication of the
position of the Automatic Barrier Gate boom
Automatic Barrier Gate Advanced Features:
1) A clutch key can be used to open the clutch when power is off.
2)Fan cooling machine reduces the motor temperature by high
frequency using, never get heat-protecting, unique temperature
calefaction design for low temperature using, prevent freezing in
cold weather.
3) An exactitude aluminum alloy die-casting motor base reduces the
noise and joint abrasion to prolong the Automatic Barrier Gate's
working life.
Automatic Barrier Gate Model Selection and Differences
Automatic Barrier Gate Specifications
Automatic Barrier Gate Model | WST1211 |
Automatic Barrier Gate Working Temperature | -40℃～+75℃ |
Automatic Barrier Gate Voltage | 220V±10%, 110V±10%, 50/60HZ |
Automatic Barrier Gate Rated power | 80W |
Automatic Barrier Gate Relative humidity | ≤90% |
Automatic Barrier Gate Remote control distance | ≥30m |
Automatic Barrier Gate Net weight | 48kgs |
Automatic Barrier Gate Speed | 1S,1.8S,3S, 6S |
Automatic Barrier Gate Max boom length | 6 meters |
Automatic Barrier Gate Motor Rotational speed | 1400rmp |
Automatic Barrier Gate Protection Degree | IP44 |
Communication with customers
1) Q: Connected power and pressed open/close button but the traffic
barrier gate did not action.
A | Reason | Solution |
1 | Fuse blown | Check the fuse and power in the controller |
2 | The battery of the remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click the OPEN/CLOSE button on the
control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q: Connected power and press the open/close button, the traffic
barrier gate will move but even when it is in the right position,
the motor still runs and does not stop.
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to the correct position |
2 | Main controller failure | Change a new one |
3) Q: The motor running but the traffic barrier gate arm is not in
action?
A | Reason | Solution |
1 | Automatic Barrier Gate arm at 45° position where is hard to move | Unlock the clutch and manually rotate the arm to a horizontal or
vertical position then try again |
2 | The tension of the balancing spring is not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing, traffic barrier gate arm cannot reach
the right position (90° vertical & 180° horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open the Automatic Barrier Gate door and unlock the clutch to check when the arm is at 90° vertical position if the master rod covers slave one; when the arm
is at 180° horizontal position if the master rod and slave one are in the
same straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal
|
| Market | Revenue(Previous Year) | Total Revenue (%) |
| North America | USD 63,608 | 1 |
| South America | USD 508,869 | 8 |
| Eastern Europe | USD 3,180,436 | 50 |
| Southeast Asia | USD 318,043 | 5 |
| Oceania | USD 127,217 | 2 |
| Mid East | USD 190,826 | 3 |
| Western Europe | USD 1,017,739 | 16 |
| Domestic Market | USD 954,130 | 15 |
FAQ:
1-Can you install using loop detector or pressure sensor on it?
Yes, the barrier gate has a loop detector and pressure sensor.
2-How about the guarantee and after-sale service?
We have a LIFETIME guarantee for our machine core, We have our
technical team & after-sale services who can speak fluent English.
3-How long is the leading time?
For standard item
10-50 sets: 3 working days
50-100 sets:5-8 working days
200-500 sets:7-10 working days
For special items, or need a custom design package or logo, need
3-7 working days longer.
4-How about the payment terms?
TT,western union,paypal, L/C
5-How do you send the products to me, how long?
As our products are big volume and heavy duty, we suggest you ship
by sea. You can also choose your own shipping forwarder. It
normally takes 7-60 days depending on different countries.
6-What is the package of the barrier gate?
Inside with a carton package. Then outside, according to the
different shipping methods, they will be packaged in wooden crates.
7-Can you do OEM service?
We offer below OEM services:
1)we can make a custom design turnstile, or if you tell us your
requirements, we can make a design for you.
2)Can print your logo on turnstiles, can customize the retail box
packing and other things.
8-Our services:
1. For all your inquiries about us or our products, we will reply
to you in detail within 24 hours
2. We own a technical team & after-sale services who can speak
fluent English.
3. We offer OEM services. Can print your logo on the products, can
customize the retail box packing, and other things.
4. We have very experienced engineers, who can help you better use
it.
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831
