Remote Control for Automatic Barrier Gates with Straight Boom
Traffic Barrier Gates in 3m , 5m , 6m
Quick Detail:
Name: Automatic barrier gate
Beam length: <=6m
Opening (Closing) time: 1s, 3s, 6s
Center height: 0.83m
Electric working temperature: -20 degrees to +75 degrees
Rated voltage: AC 220V (10%) 50Hz/60Hz, 110V (10%) 50Hz/60Hz
Rated power: 120W
Relative humidity: <=90%
Remote control distance: >=30m
Functions & Features
1. By-security. The barrier gate will automatically go back when
meet obstacles during closing.
2. AC motor is more powerful and no maintenance.
3. Barrier Beam/arm can be chosen from 3 meters to 6 meters, and
barrier gate
4. closing time is also arranged from 1 second to 6 seconds.
5. The barrier gate can be both right-installed and left-installed.
6. All the operation process is soft without any noise and shaking.
7. Infrared photocell interface, Loop detector interface and IC
system
8. interface are reserved for the other functions.
9. Green light and red light are used inside for indication the
position of the beam.
Model Selection and Differences
Model | Boom Shape | Max Boom Length | Speed |
WST1171 | Straight boom | 6m | 6 seconds |
WST1172 | Straight boom | 4.5m | 3 seconds |
WST11721 | 90 degree, Articulated boom | 5m | 6 seconds |
WST11722 | 90 degree, Articulated boom | 3m | 3 seconds |
WST11761 | 180 degree, Articulated boom | 5m | 6 seconds |
WST11762 | 180 degree, Articulated boom | 3m | 3 seconds |
Specifications
Model | WST1171 |
Working Temperature | -40℃～+75℃ |
Voltage | 220V±10%, 110V±10%, 50/60HZ |
Rated power | 80W |
Relative humidity | ≤90% |
Remote control distance | ≥30m |
Net weight | 48kgs |
Speed | 1S,1.8S,3S, 6S |
Max boom length | 6 meters |
Motor Rotational speed | 1400rmp |
Protection Degree | IP44 |
With WONSUN, your job gets easier.
Because we don’t just create “good” products, that work pretty
well.Our thinking is beyond the short-term.We are conceiving,
designing and creating high-tech solutions that are as advanced and
effective as they are reliable and long-lasting.
Because we want to provide tools and services that truly are
innovative,that will improve your performance and enhance your
skills;and that will make your business easier, increasing its
profitability.
Because our focus is on Quality with a capital Q.We just won’t
settle for less.
Communication with customers
1) Q: Connected power and press open/close button but electronic
barrier gate no action?
A | Reason | Solution |
1 | Fuse blown | Check fuse and power in controller |
2 | Battery of remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click OPEN/CLOSE button on control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q:Connected power and press open/close button, electronic
barrier gate will move but even when it is at right position, the
motor still running and not stop?
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to correct position |
2 | Main controller failure | Change a new one |
3) Q: Motor running but electronic barrier gate arm no action?
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock clutch and manually rotate arm to horizontal or vertical
position then try again |
2 | Tension of balancing spring not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing,electronic barrier gate arm cannot reach
right position (90° vertical & 180° horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at
180° horizontal position if master rod and slave one are in the same
straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal position |
