5 Million Operation Times Traffic Barrier Gate with Double Limit
Switch Three Fence Arm
Quick Detail:
Name: Traffic Barrier Gate
Speed:6 seconds
Feature:Straight boom
Rated Power:80W
Certificate:CE, ISO, SGS
Net Weight:48KG
Voltage:AC220V, AC110V
Model Selection and Differences
Model | Boom Shape | Max Boom Length | Speed |
WST1211 | Three fence boom | 4.5m | 6 seconds |
Functions & Features
1) Three control buttons: for boom raising,falling and pausing
2) Boom backtrack function: the boom will rise if it hits something
when falling
3) Infrared photocell dasign: for avoiding the crash when the boom
falling, so as to prevent the vehicles from being pressed.
4) Both external and internal loop detectors are supported.
5) Open,Close and Stop controlling interfaces
6) Traffic light signal connection device:red light for stop; green
light for pass.
7) Remote control and wire control for selection
8) Delay off the boom close function
Working environment
1.Machine core working temperature : -35℃~+60℃
2. Electric cabinet working temperature: -20℃~+75℃
3.Rating voltage: 220V±10%,50/60HZ
4.Rating Power: 80W
5. Relative humidity: ≤90%RH
6.Remote control distance: 30m≤ L ≤ 100m
With WONSUN, your job gets easier.
Because we don’t just create “good” products, that work pretty
well.Our thinking is beyond the short-term.We are conceiving,
designing and creating high-tech solutions that are as advanced and
effective as they are reliable and long-lasting.
Because we want to provide tools and services that truly are
innovative,that will improve your performance and enhance your
skills;and that will make your business easier, increasing its
profitability.
Because our focus is on Quality with a capital Q.We just won’t
settle for less.
Communication with customers
1) Q: Connected power and press open/close button but traffic
barrier gate no action?
A | Reason | Solution |
1 | Fuse blown | Check fuse and power in controller |
2 | Battery of remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click OPEN/CLOSE button on control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q:Connected power and press open/close button,traffic barrier
gate will move but even when it is at right position, the motor
still running and not stop?
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to correct position |
2 | Main controller failure | Change a new one |
3) Q: Motor running but traffic barrier gate arm no action?
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock clutch and manually rotate arm to horizontal or vertical
position then try again |
2 | Tension of balancing spring not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing,traffic barrier gate arm cannot reach
right position (90° vertical & 180° horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open barrier door and unlock clutch to check when arm at 90° vertical position if the master rod covers slave one; when arm at
180° horizontal position if master rod and slave one are in the same
straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal position |
