Functions and Features Parking Lot Management System
1. Open and close speed adjustable
2. Arm direction Left and Right can change easily
3. When power off, manual open and close arm, and lock itself.
4. Wireless remote
5. Photocell I0 port output
6. Loop detector anti-collision I0 output
7. Open and close control input
8. 12V traffic light output
9. Traffic light signal output
10. Open and close limit signal output
11.Counting (fleet) input RS485 communication input
12. 24V battery input port
13. Delay close arm function(1-300 sec. Adjustable)
Electrical installation and wiring diagram
1. The internal wiring of the machine has been completed when it
leaves the factory, please do not
change it, just connect the 220V power supply and the protective
ground wire to work.
2. Traffic light interface: 2A12V voltage traffic light use.
3. Infrared anti-smashing interface: external infrared
anti-radiation device, just connect the switch
signal of the anti-radiation output.
4. Ground sense interface: support external ground sense. When
using an external ground sensor,
you only need to connect the switch signal output by the ground
sensor.
5. Parking system interface wire control interface: connect the
switch signal of the system to this
interface to control the barrier.
6. Starting limit and landing limit signal output: output COM/NO/NC
switch signals to the system to
inform the current state of the barrier.
7. RS485 communication interface: PC software can be used to manage
more than 15 barriers.
Spring installation,disassemble and replacement Parking Lot Management System
Disassemble step as below: put arm on vertical position
1. Unscrew the M8*140MM screw with a hexagonal spanner
2. Calibrate gate arm position
To calibrate the position of the barrier arm (for example, after
applying excessive force), follow the steps below:
1. Open the door of the barrier box and remove the cover.
2. Loosen the two fastening screws of DZ-1 on the pendulum shaft
with an M12 Allen key, so that the barrier
arm can be repositioned by hand.
3. Calibrate the position of the barrier arm (horizontal position,
as shown in Figure 1).
4. Retighten the two fastening screws with a hex wrench
Servo barrier function setting parameter table
| MENU NO. | Parameter scale | Parameter name | Default | Unit | Remark |
| H00-00 | 10-100 | Maximum speed of open arm | 25 | | Percentage; the default maximum speed of the motor is 2000RPM |
| H00-01 | 10-100 | Maximum speed of close arm | 25 | | Percentage; the default maximum speed of the motor is 2000RPM |
| H00-02 | 5-40 | Minimum speed of open arm | 5 | | Percentage; the default maximum speed of the motor is 2000RPM |
| H00-03 | 5-40 | Minimum speed of close arm | 5 | | Percentage; the default maximum speed of the motor is 2000RPM |
| H00-04 | 50-420 | Open arm deceleration angle | 20.0 | | The smaller the parameter, the faster the speed; 50 means 5.0
degrees |
Error code:
| 1:EFF-01 | Check the motor or wiring. | Generally, the motor or the motor wire is not connected properly. |
| 2. EFF-02 | The voltage is lower than 22.0V | the switching power supply or the battery voltage is not enough |
| 3. EFF-03 | The load is too heavy or the drive board is damaged, and the motor
wiring is wrong. | Check whether the motor wires are in good contact, and replace the
drive. Or load |
| 4. EFF-04 | If the limit is not reached for 5 consecutive times | Reset the limit point, or eliminate the problem of the limit device |
| 5. EFF-05 | Occurs during self-inspection, or the motor is stuck or the load is
too heavy | |
FAQ
1-Can you install using loop detector or pressure sensor on it?
Yes,the stanadard advertising barrier gate have loop detector and
pressure sensor.
2-How about the guarantee and after sale service?
We have 1 year quality guarantee, We own well tranied and passional
sales & aftersale services who can speak fluent English language.
3-How long is the leading time?
For standard item
10-50 sets:5 working days
50-100 sets:7-10 working days
200-500 sets:10-15 working days
For special item, or need custom design package or logo, need 3-10
working days longer.
4-How about the payment terms?
TT,western union,our company already joined the trade assurance,it
will highly protect your order security.
Palang Parkir Barrier Gate Backup Battery for Parking Lot
Management System
Palang Parkir Barrier Gate Backup Battery for Parking Lot
Management System
Palang Parkir Barrier Gate Backup Battery for Parking Lot
Management System
