DC Brushless Motor Intelligent Barrier Gate Speed Adjustale For
Parking Lot System
1. Parameters of Intelligent Barrier Arm Type,Length and Operation Speed
| Arm type | Arm Length(L) | Operation time(S) | Height between arm and ground (M) |
| Straight arm | 6m≥L>5m | 5S | H=0.83m, height of arm center from ground level |
| 5m≥L≥4.5m | 4S |
| 4.5m>L≥3m | 3S |
| 90°folding arm | L≤5m | 5S |
| 180°folding arm | L≤5m | 5S |
| Two fence arm | 5m≥L≥4m | 6S | H=0.9m,height of arm center from ground level |
| 4m>L≥3m | 3S |
| Three fence arm | 5m≥L≥4m | 6S | H=1.5m,height of arm center from ground level |
| 4m>L≥3m | 5S |
2. Adjust the Position of Barrier Arm
1. To adjust the position of the arm (for example, after exerting
excessive force), please take the steps as below:
open the barrier gate door and remove the cover
2. Loosen the two fastening screws of the DZ-8 on the pendulum
shaft with an M12 Allen key, so that
the barrier arm can be repositioned by hand.
3. Calibrate the position of the barrier arm (horizontal position,
as shown in Figure 1).
4. Use a hexagon wrench to re-tighten the two fastening screws
3.Intelligent Barrier Technical parameters
| Working temperature(motor): -35℃~+85℃ |
| Rated voltage:DC24V |
| Running speed:1.5s-8s |
| Rated current:8.58A |
| Rated power:160W |
| No-load speed:1850rpm |
| Rated speed:1400rpm |
4. Equipment installation
Please select the correct type of barrier gate according to the
specifications of
the pace,and then fix the barrier cabinet with expansion
bolts(refer to Figure 3).
After determined the position,the barrier gate foundation should be
done according to the site conditions,and also
make the cast-in-place basement for the non-concrete ground.
Barrier arm balance adjustment
1,Please check and confirm arm status in horizon and vertical
position,then
tighten 2pcs M12 screw.
2,According to arm balance status, repeat adjusting the spring
level of tightness
of M8*140MM, make sure the arm open and close in stable.
3,For the barrier gate with double springs,please adjust the two
springs simultaneously.
4,If arm open and close shake too much, Please check below picture.
Open arm
shaking a lot means spring is too tight, loose a little. Close arm
shaking too much means
spring too lose, repeat tighten a little spring.
Intelligent Barrier Gate FAQ
1-Can you install using loop detector or pressure sensor on it?
Yes,the stanadard advertising barrier gate have loop detector and
pressure sensor.
2-How about the guarantee and after sale service?
We have 1 year quality guarantee, We own well tranied and passional
sales & aftersale services who can speak fluent English language.
3-How long is the leading time?
For standard item
10-50 sets:5 working days
50-100 sets:7-10 working days
200-500 sets:10-15 working days
For special item, or need custom design package or logo, need 3-10
working days longer.
Wonsun is a professional manufaturer for barrier gate, boom
barrier, sliding gate motor. If any interest, please contact me
freely.
Email: keira@wonsunbarrier.com
Skype: zimin1314
Whatsapp: +86 185 0748 1610
Wechat: Keira_Xia
Inte
lligent Parking Barrier Gate 6m Arm with DC24V Brushless Motor For
Parking lot SYSTEM
