Two Speed Range 8s DC Brushless OEM 6M Folding Arm For Driveway
Barrier Gate
Features
1 The running speed can be adjusted from 3s to 8s
2 Can be quickly interchanged
3 Open the barrier gate by motor wheel when power off
,automatically reset after power on
4 Curved crank arm three- link movement structure, the operation is
stable
5 Wireless remote control control open/close
6 Auto reverse function(force adjustable)
7 Infrared photocells connector is available
8 Loop detector connector is available.
9 Well-integrated with car parking system equipment,with wire
control(must be switch signal)
Technical parameters
Working temperature(motor): -30℃~+70℃
Rated voltage:DC24V
Running speed:1.2s~4s/ 3s~8s
Rated power:160W
Remote control distance:≤100M(in the open place)
IP Degree:IP44
Max length of arm:6M straight arm
Adjust the Position of Barrier Arm
To adjust the position of the arm (for example, after exerting
excessive force), please take the steps as below:
1. open the barrier gate door and remove the cover
2. Loosen the two fastening screws of the DZ-8 on the pendulum
shaft with an M12 Allen key, so that the barrier arm can be
repositioned by hand.
3. Calibrate the position of the barrier arm (horizontal position,
as shown in Figure 1).
4. Use a hexagon wrench to re-tighten the two fastening screws
Electrical installation, wiring diagram
1. The internal wiring of this machine has been completed when it
leaves the factory, please do not change it,
just connect the 220V power supply and the protective ground wire
to work.
2. Traffic light interface: 2A24V voltage traffic light use.
3. Infrared anti-smashing interface: external infrared
anti-radiation device, and the switch signal of the anti-radiation
output can be connected.
4. Ground sense interface: support external ground sense. When
using an external ground sensor, you only need
to connect the switch signal output by the ground sensor.
5. Parking system interface wire control interface: connect the
switch signal from the system to this interface to
control the barrier.
6. Starting limit and landing limit signal output: output COM/NO/NC
switch signal to the system to inform the
current state of the barrier.
7. RS485 or CAN communication interface: PC software can be used to
manage more than 15 barriers.
FAQ
1-Can you install using loop detector or pressure sensor on it?
Yes,the stanadard advertising barrier gate have loop detector and
pressure sensor.
2-How about the guarantee and after sale service?
We have 1 year quality guarantee, We own well tranied and passional
sales & aftersale services who can speak fluent English language.
3-How long is the leading time?
For standard item
10-50 sets:5 working days
50-100 sets:7-10 working days
200-500 sets:10-15 working days
For special item, or need custom design package or logo, need 3-10
working days longer.
4-How about the payment terms?
TT,western union,our company already joined the trade assurance,it
will highly protect your order security.
5-How do you send the products to me,how long?
As our products are big volume,and heavy duty, we suggest you to
ship by sea. You can also choose your own shipping
forwarder. it normally takes 7-60 days depend on different
countries.
6-What is the package of the barrier gate?
Inside with a carton package.Then outside,there are wooden crate
package.
WONSUN Barrier Series: Click the picture and leave your message, Keira will reply
you in an hour.
| Classic AC barrier | Economical DC Barrier | Hot Sale DC Barrier | Hot Sale DC barrier | High-end Servo Barrier |
 |  |  |  | 
|
Wonsun is a professional manufaturer for barrier gate, boom
barrier, sliding gate motor. If any interest, please contact me
freely.
Email: keira@wonsunbarrier.com
Skype: zimin1314
Whatsapp: +86 185 0748 1610
Wechat: Keira_Xia
Intelligent Parking Barrier Gate 6m Arm with DC24V Brushless Motor
For Parking lot SYSTEM
