Automatic Barrier Gate Rfid Reader Car Parking System Parking
Entrance Loop Sensor Barrier Gate
Product Overview:
Brushless DC motor is composed of motor body and driver. It is a
typical mechatronic integration product.
It is characterized by small volume, low noise, high efficiency,
wide speed regulation range and small
steady-state speed error. The fourth-generation reducer that
dedicated to the barrier gate, a variety of
speed ratio can be selected, stable operation, customized gear
transmission efficiency is higher, high
stability, more and more respected by the market.
Automatic Barrier Gate Technical parameters:
| Working temperature | -35~+65℃ |
| Power supply | 24V DC |
| Open/close speed | 2.8s to 6s |
| Rated power | 150W |
| Driving method | DC brushless motor |
| Output torque | 56.8N.m |
| Protection grade | IP54 |
Automatic Barrier Gate Features:
1 The running speed can be adjusted from 3s to 8s
2 Can be quickly interchanged
3 Open the barrier gate by motor wheel when power off
,automatically reset after power on
4 Curved crank arm three- link movement structure, the operation is
stable
5 Wireless remote control control open/close
6 Auto reverse function(force adjustable)
7 Infrared photocells connector is available
8 Loop detector connector is available.
9 Well-integrated with car parking system equipment,with wire
control(must be switch signal)
Motor performance parameters:
| Motor type | Rated voltage(V) | No-load characteristic | |
| GDMW90/60-250-24-18S09C | 24 | No-load current(A) | No-load speed(/min) | Rated current(A) | Rated speed(r/min) | Rated torque(N*m) |
| ≤2.5 | 42 | 14.9 | 36 | 47 |
Matters needing attention:
1. According to the correct wiring method, in order to avoid the
motor does not turn or burn the motor;
2. The motor should not be overloaded and blocked for a long time
to avoid too high temperature rise;
3. The assembled gear reducer should not be disassembled casually,
so as to avoid debris entering or noise
caused by poor gear meshing;
4. When the shaft of motor and gear reducer is connected with load,
it can not be gravity knocked or squeezed,
so as not to cause internal deformation, serious noise or stuck
phenomenon;
5. Do not drag the lead wire of the motor to avoid electric shock
accident;
6. Avoid touching the rotating part when the motor is running, so
as not to cause human injury; Motor housing
should be in good condition.
Automatic Barrier Gate FAQ:
Q1.How about payment terms our company provide?
A: T/T
Q2.Which is your min order?
A: 1 piece
Q3.Model color size and craft for all barrier gates can be
customized?
A: Yes, we can, welcome OEM & ODM. We also can put logo of your
company on product
