Toll Barrier Gate 1.5sec Backup Battery DC Boom Barrier Folding Arm
Safe Operation safety with position sensors, physical limiters and
integrated photocell
Heavy duty Consequent movements with 100% heavy duty
Precise Smooth speed and movement control
Reliable Easy installation with slotted mounting plate low serice
requirement, long product lifetime. |
Features
1 The running speed can be adjusted from 1.5s to 6s
2 Can be quickly interchanged
3 Open the barrier gate by motor wheel when power off
,automatically reset after power on
4 Curved crank arm three- link movement structure, the operation is
stable
5 Wireless remote control control open/close
6 Auto reverse function(force adjustable)
7 Infrared photocells connector is available
8 Loop detector connector is available.
9 Well-integrated with car parking system equipment,with wire
control(must be switch signal)
Working temperature(motor) | -35℃~+85℃ |
| Rated voltage | DC24V |
| Running speed | 1.5s-6s |
| Rated curren | 8.58A |
| Rated power | 140W |
| No-load speed | 1850rpm |
| Rated speed | 1400rpm |
| Output Power | 56.8N.m |
| Relative humidity | ≤90% |
| Remote control distance | ≤100M(in the open place) |
| IP Degree | IP44 |
| Place of origin | China |
Product Maintenance
1 Keep the barrier gate clean
2 Check the joints ever month in case of any loose parts.
3 Check the spring elasticity after the barrier gate running 3000
times.
4 Check the easily worn-out parts(like the spring,limit
switch),every half year and renew it.
5 Remote control distance will be shortened or not work in case
like big object screening,battery exhausting,extreme weathers.
Electrical installation, wiring diagram
1 All the electrical connections are done before delivery and
please do not change it randomly.The necessity is to connect the
AC220V power and grounding connection.
2 Traffic light connector:it can connect power no more than 40W.
3 Infrared photocells an-hit connector: connect the switch signal
for receiver output.
4 Loop detector connectors:it supports both externally and
internally loop detector(only one way can be chosen).
If external type is selected,just connect the switch signal for
loop detector output.
If the internal type is selected,need connect the wire signal to
vehicle detector wire interface.
5 Car parking system connectors: connect the system switch signal
to this connector,then it can control the barrier gate operation.
6 Limit switch signal of up/down:with output COM,NO,NC,it
monitoring the status of the barrier gate.
7 RS485 connector:after chosen the options RS485 module,it can
manage MAX 15 pieces of barrier gates by PC software.
Contact information:
Sue Zhang
Skype:SueZhang729
Whatsapp:+86 158 7925 9831
Email:sue@wonsunbarrier.com
