AC Servo Toll Barrier Gate Features:
1.Patentednon-slip design: Anti-skid device design, safeand
reliable
2.No welding Boom Bracket: Easy disassembly and assembly
nodeformation, greatly improve productionefficiency, and easy
maintenance
3.Three-link transmission: The operation is stable andthe lifting
is in place, and theself-locking design of thelifting and falling
in place afterpower failure
4.Planetary Gearbox: High precision, high efficiency.large torque,
long life
5.Hoisting design: Integrated design ofhoisting, can adaptto more
than 30 appearance options
6.Permanent Magnet Rare Earth Servo Motor: Permanent magnet rare
earthmotor no demagnetization. noheat generation, pure
coppermaterial.low power consumo-tion, long life, free
speedrequlation, accurate limit
Toll Barrier Gate Functions:
1. Operation speed can be adjusted.
2. Slow up and slow down can be adjusted.
3 The limit angle can be adjusted.
4. Left and right direction can be quickly interchanged.
5. The barrier arm can be manually operated in case of
powerfailure.
6, 418 frequency leaming code anticopy remote controller.7.
Infrared photocell sensor lO signal input function.
8. Loop detector and radar lO signal anti-collision signal
inputfunction.
9. Up, down and stop lO signal input function.
10. Counting (fleet) function.
11 LED light lO signal output function.
12. Traffic light lO signal output function.
13. Up and down in place, normally open and normally closedsipnal
output function.
Plane
14.RS485 communication output function.
15.Delay arm drop function.
16.Arm auto-reverse function.
17. Automatic lifting function when power is off
(requiresadditional power storage module).
18. l0 port single-key cycle up and down function.
19. Loop detector normally open and normally closed function.20.
One car and one arm to prevent toll evaslon function.
Electrical installation, wiring diagram
1. The internal wiring of this machine has been completed when it
leaves the factory, please do not change it,
just connect the 220V power supply and the protective ground wire
to work.
2. Traffic light interface: 2A24V voltage traffic light use.
3. Infrared anti-smashing interface: external infrared
anti-radiation device, and the switch signal of the anti-radiation
output can be connected.
4. Ground sense interface: support external ground sense. When
using an external ground sensor, you only need to
connect the switch signal output by the ground sensor.
5. Parking system interface wire control interface: connect the
switch signal from the system to this interface to control
the barrier.
Packing List
| Name | Specification | Qty | Unit | Note |
| Hexagon screw | M12*70 | 2 | Piece | Fixing the boom |
| Boom press board | | 1 | piece | |
| Mounting batten | | 2 | piece | Fixing the case |
| Expansion bolt | M12*150 | 4 | unit | Fixing the case |
| Case Key | | 2 | unit | |
| Remote controller | | 2 | unit | |
| Instruction | | 1 | piece | |
