Parking Lot Intelligent Automatic Barrier Gate Vehicle Access
Control
Automatic Barrier Gate Basic Features:
1. Automatic Barrier Gate steady function, sensitive reaction, low noise
2. The case shell is made of thickened steel shaped by 13 process
flow. Without fading, waterproofing is not rusty and is durable.
3. High-sensitive limit switch, the pole can be instantly turned on
and off accurate location.
4. The control system adopts hi-tech digital chip technology.
5. Automatic Barrier Gate the anti-collision function. Protecting the passenger
6. Automatic Barrier Gate the inductive function, of the digital vehicle detector
7. Automatic Barrier Gate the movements adopt the most steady running mode –non-constant
speed mode. Or the variable speed excogitation. (Slow – quick –
slow ) .This function makes the operation steady and prolongs the
working life.
Automatic Barrier Gate Advanced Features:
1) A clutch key can be used to open the clutch when power is off.
2)Fan cooling machine reduces the motor temperature by high
frequency using, never get heat-protecting, unique temperature
calefaction design for low temperature using, prevent freezing in
cold weather.
3) An exactitude aluminum alloy die-casting motor base reduces the
noise and joint abrasion to prolong the barrier gate's working
life.
Automatic Barrier Gate Model Selection and Differences
Automatic Barrier Gate Specifications
Automatic Barrier Gate Model | WST1211 |
Automatic Barrier Gate Working Temperature | -40℃～+75℃ |
Automatic Barrier Gate Voltage | 220V±10%, 110V±10%, 50/60HZ |
Automatic Barrier Gate Rated power | 80W |
Automatic Barrier Gate Relative humidity | ≤90% |
Automatic Barrier Gate Remote control distance | ≥30m |
Automatic Barrier Gate Net weight | 48kgs |
Automatic Barrier Gate Speed | 1S,1.8S,3S, 6S |
Automatic Barrier Gate Max boom length | 6 meters |
Automatic Barrier Gate Motor Rotational speed | 1400rmp |
Automatic Barrier Gate Protection Degree | IP44 |
Automatic Barrier Gate Communication with customers
1) Q: Connected power and pressed open/close button but the traffic
barrier gate did not action.
A | Reason | Solution |
1 | Fuse blown | Check the fuse and power in the controller |
2 | The battery of the remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click the OPEN/CLOSE button on the
control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q: Connected power and press the open/close button, the Automatic Barrier Gate will move but even when it is in the right position, the motor
still runs and does not stop.
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to the correct position |
2 | Main controller failure | Change a new one |
3) Q: The motor running but the traffic barrier gate arm is not in
action?
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock the clutch and manually rotate the arm to a horizontal or
vertical position then try again |
2 | The tension of the balancing spring is not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing, traffic barrier gate arm cannot reach
the right position (90° vertical & 180° horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open the barrier door and unlock the clutch to check when the arm
is at 90° vertical position if the master rod covers slave one; when the arm
is at 180° horizontal position if the master rod and slave one are in the
same straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when the arm at 90° vertical and 180° horizontal position |
For the things that most customers want to know:
1. One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper voltage.
3. The surfaces of the system were destroyed by the wrong
installation our use.
4. Broken by natural disaster.
5. Overdue
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if
there is any.
The explaining authority of this product instruction and service
article belongs to the production factory.
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831
